FOLDERS: International Fibreboard Case Code:
04 Series
For folders, one or more pieces of combined board provide an unbroken
bottom surface, and are scored to fold around a product. The International
Fibreboard Case Code describes them as Folder-Type Boxes. The carrier
classifications use the term Folders.
|
|
0401 One
Piece Folder (OPF)
One piece of board is cut so that it provides
a flat bottom, with flaps forming the sides and ends, and extensions
of the side flaps meeting to form the top. |
|
| |
|
|
|
|
|
| 0403 One
Piece Folder with Air Cell/End Buffers, Protect All or Bookwrap |
|
0406 Wrap
Around Blank
A wrap-around blank is formed into a box by
folding it tightly around a rigid product. The positioning of
the product, folding and sealing are performed by automatic equipment.
The finished box is essentially an RSC, turned on
its side so that the bottom and top are unbroken. The joint, however,
is not formed until the final closure. |
| |
|
|
|
|
|
0410 Five
Panel Folder (FPF) or Harness Style Five Panel Folder
A single cut and scored piece features a fifth
panel used as the closing flap, completely covering a side panel.
The closed box has several layers of com-bined board on each end,
providing stacking strength and protection for long articles of
small diameter which might be damaged, or damage the box, if pushed
through the ends. |
|
0411 Center
Seam FPF |
| |
|
|
<
Back
More
Folders Boxes > |
|
|
Above Content Derived from Fibre Box Handbook. Courtesy
of Fibre Box Association. |
